#Happy angry octopus update
#Happy angry octopus manual
#Happy angry octopus Patch

Only parts that did not change are : _Buffer_Wheel, _Latch, _Sliding_Arm, Buffer_Axis, Ptfe_Entry_ECAS and Ptfe_Entry_M10.Updated the assembly manual, BOM and the CAD accordingly.Increased the size of the Buffer Cross 'pillar' that sits between the two PTFE paths (some users previously reported fragilities due to the lack of matter for this pillar).

Inserting the ECAS will no longer crack the plastic Buffer Cross ECAS insert has been tuned, reinforced and a 'bridge' shape has been added.

Buffer Cross bottom arm is now secured using a M3X20 SHCS screw that comes from the bottom (that is also securing the left feet of the Carrot Patch).Now the wheel should slightly touch both side walls (to avoid any possible gaps) while being able to turn (but not freely, which is on purpose) Fixed several parts lengths//size that impacted the buffer wheel installation.

#Happy angry octopus Patch

Removed useless chamfer on feet bottom screw holes and increased hole depth (one can now properly use M3X8 SHCS to secure the Carrot Patch on 2020 extrusions).

Increased handles section near the threaded insert for more robustness.

June 2nd 2021 : Release of Carrot Patch V1.1.

If you're already running EarlyDevAccess stuff, that won't change anything for you

June 4th 2021 : TopHatLockers and related (servo arm, TopGearHat, macros) have been released to the main branch, from the EarlyDevAccess branch.

September 14th 2021 : Updated the BOM to ERCF V1.1 (release coming soon! tm) and added the new, incoming Toolhead Sensor BOM (bottom tabs).

V1.1 software will be released in a few days. Finally, note that the new software part of the ERCF V1.1 is not out yet, and the ERCF V1.1 hardware cannot be used with the ERCF V1.0 macros. A non-exhaustive patch note can be found in the Carrot_Feeder folder.

#Happy angry octopus manual

September 17th 2021 : The ERCF V1.1 assembly manual, STL files and the STEP file are now released! You'll find the manual in the 'Documentation' section now, and the manual will keep growing with setup, tuning and slicer guides.

September 24th 2021 : The ERCF V1.1 macros and python module are out! Also an updated manual (with the setup and calibration steps) and additionnal stuff for EASY BRD users! Have fun!.

#Happy angry octopus update

October 1st 2021 : Update including VORON SwitchWire mount, new Galileo Clockwork Toolhead sensor, additions to the manual and a few others things!.

October 7th 2021 : Updated SwitchWire mount, LGX on AfterBurner toolhead sensor and associated manual sections.

October 15th 2021 : Added AfterBurner Clockwork toolhead sensor and associated manual sections.October 23th 2021 : Update of the ERCF Macros and python module and added first part of manual Slicer setting section.March 23th 2022 : Revamp of ERCF unload sequence during a print, possibility to use stallguard capabilities to detect selector blockages, new encoder cart and much more.April 4th 2022 : Minor fixes and updates, check the new last page of the manual for tuning the last check of the load sequence.You like this project? You want to support me and my work, help me bring new cool stuff to the community? Well you can tip me here : While this project is mainly dedicated to be used on VORON printers, it can also be used (or adapted) on any 3D printer that runs Klipper, and potentially RRF. This project aims to bring multimaterial capabilities to 3D printers using a single Direct Drive toolhead. Welcome to the Enraged Rabbit Project Github page!